LA25 MKII

Revolutionary Swedish designed 3 channel 25W tube amplifier. With built-inRe-Amplifier, a DI, a Virtual Mic speaker simulator and a reactive load. Revolutionary Swedish designed 3 channel 25W tube amplifier. With built-inRe-Amplifier, a DI, a Virtual Mic speaker simulator and a reactive load.

You can use the LA25 MKII without any speaker or an external load. The possibilities are limitless.

• The controls are sitting protected in a recess in the 5mm thick aluminium frontplate.
• Laserengravingto keepthe graphics from fading out after many years of operating.
• Illuminated letters above each potentiometer for fast recognition even in the dark.
• Combo jack, 1/4"jack or XLR plus a ground lift control. With the built-in Re-Amplifier you can use this amp for re-amping. In conjunction with the Virtual Microphone, this amp can be used manydifferent configurations.
• EQ,Modern / Vintage setting for the Virtual Microphone.The Virtual Microphone is a Speaker Cab Simulator. There are Distance and Angle controls forfine-tuning of the virtual micing.This means that you can use the amp for recordings without a speaker and it issafe because there is a built-it reactive load.
• FX loop switch with pot control to adjust the signal level that returns to the amplifier.
• FX loop switch with pot control to adjust the signal level that returns to the amplifier.
• DI FX,a switch for the PRE DI FX INSERT loop on the back the amp.
• High Pass Filter
• Open, Plexi and Bright sound modes
• Channel cycle

Rear Panel

• Electricity input with fuses and voltage selector
• 16, 8 and 4 Ohm Speaker Output
• Virtual Microphone with mic/line level switch and ground lift
• Line Out / Slave Output
• FX Loop
• Pre DI FX Insert
• DI Mic Out with ground lift
• Footswitch connector

Footswitch

• 3 separate switches with LEDfor the channels
• Boost switch
• FX switch