LA25 MKII

Revolutionary Swedish designed 3 channel 25W tube amplifier. With built-in Re-Amplifier, a DI, a Virtual Mic speaker simulator and a reactive load. Revolutionary Swedish designed 3 channel 25W tube amplifier. With built-in Re-Amplifier, a DI, a Virtual Mic speaker simulator and a reactive load.

You can use the LA25 MKII without any speaker or an external load. The possibilities are limitless.

• The controls are sitting protected in a recess in the 5mm thick aluminum frontplate.
• Laser engraving to keep the graphics from fading out after many years of operating.
• Illuminated letters above each potentiometer for fast recognition even in the dark.
• Combo jack, 1/4" jack or XLR plus a ground lift control. With the built-in Re-Amplifier you can use this amp for re-amping. In conjunction with the Virtual Microphone, this amp can be used many different configurations.
• EQ, Modern / Vintage setting for the Virtual Microphone. The Virtual Microphone is a Speaker Cab Simulator. There are Distance and Angle controls for fine-tuning of the virtual micing. This means that you can use the amp for recordings without a speaker and it is safe because there is a built-in reactive load.
• FX loop switch with pot control to adjust the signal level that returns to the amplifier.
• FX loop switch with pot control to adjust the signal level that returns to the amplifier.
• DI FX, a switch for the PRE DI FX INSERT loop on the back of the amp.
• High Pass Filter
• Open, Plexi and Bright sound modes
• Channel cycle

Rear panel

• Electricity input with fuses and voltage selector
• 16, 8 and 4 Ohm Speaker Output
• Virtual Microphone with mic/line level switch and ground lift
• Line Out / Slave Output
• FX Loop
• Pre DI FX Insert
• DI Mic Out with ground lift
• Footswitch connector

Foot switch

• 3 separate switches with LED for the channels
• Boost switch
• FX switch